J. K. Industries

A base plate 150x150x6mm is a flat, typically square or rectangular metal plate used in scaffolding and other construction applications to distribute the load of vertical posts (standards) over a larger surface area. The specific dimensions you’ve provided (150mm x 150mm x 6mm) refer to the length, width, and thickness of the base plate.

Uses of a 150x150x6mm Base Plate:

1. Distributing Load: The base plate helps to spread the weight of the scaffolding or structural elements across a larger surface area, reducing the risk of the scaffold sinking into soft ground or damaging the surface underneath. It helps ensure the vertical standards (posts) are firmly supported.

2. Stabilizing Scaffolding: When used in scaffolding systems, the base plate provides stability and ensures that the scaffolding structure remains upright. It is particularly important in outdoor or uneven environments where the surface may not be perfectly level.

3. Protection: The base plate protects the scaffolding from direct contact with the ground, reducing wear and tear. It also protects the surface underneath, such as concrete or asphalt, from potential damage caused by the scaffolding posts.

4. Safety: The base plate prevents the scaffold from tipping over by creating a stable foundation. It helps absorb and distribute any forces that might otherwise destabilize the scaffold structure, such as wind, vibration, or uneven weight distribution.

   Specifications of a 150x150x6mm Base Plate:

   1. Dimensions:

      • Length & Width: 150mm x 150mm (15cm x 15cm), which is the square or rectangular footprint of the base plate. This gives a sufficient area for distributing the weight of the scaffold post.
      • Thickness: 6mm refers to the thickness of the metal used to make the base plate. A 6mm thickness is a standard size for moderate-weight scaffolding applications.
      •  Hole(s) for Pin or Bolt:
        • A typical base plate may have a central hole or holes for attaching it securely to the scaffold post (standard). This allows the plate to remain fixed in place when the scaffold post is adjusted.
        • Some base plates might have additional holes or slots for securing the base plate with bolts or pins to prevent it from shifting.
        • Applications of 150x150x6mm Base Plate:

          1. Scaffolding: The base plate is commonly used in scaffolding systems as the foundation for scaffolding posts. It prevents the post from sinking into the ground and ensures a stable base for the scaffold.

          2. Formwork Support: In construction, base plates are often used to support temporary formwork systems. They provide a stable surface for vertical supports that hold formwork in place during concrete pours.

          3. Construction Equipment: These base plates can also be used in other temporary structures and machinery that require stable, level footing, such as in shoring, lifting equipment, or temporary staging.

          4. Structural Support: In some cases, base plates of this size and thickness may be used in structural steelwork to distribute loads at the base of vertical steel columns or posts.

BASE PLATE 4 HOLE AND 5 HOLE FOR PROP AND JACKS.THICKNESS AVAILABLE 5MM,6MM AND 8 MM. 
OverviewThe base plate is a flat, load‑bearing component that sits beneath a prop (vertical support) and a jack (adjustable foot). It distributes the weight of the scaffold over a larger area, preventing sinking into soft ground and providing a stable foundation for height‑adjustable jacks.
Key FeaturesMaterial: Hot‑dip galvanized mild steel, 6 mm thick.Shape: Square with rounded corners, 200 mm × 200 mm.Mounting: Four pre‑drised holes (M12) at each corner for anchoring bolts.Compatibility: Accepts standard 48 mm prop tubes and fits most base‑jack threads (M24).Load Rating: Up to 5 kN per plate (tested to IS 807).

Additional Information:

• Item Code: 006
• Production Capacity: 50000 Per Month
• Delivery Time: 2-3 days
• Packaging Details: As per Customer Requirement

JK UNIVERSAL CLAMP used in various situations.

JK COMBINATION PLATE WITH DROP FORGED WING NUT 

Additional Information:

• Item Code: 003
• Production Capacity: 30000 Per Month
• Delivery Time: 2-3 Days
• Packaging Details: As per customer Requirement